Re: I need to know....
Posted: Thu May 21, 2020 6:21 pmmighty_tiger_79 wrote:Not much
Sent from my SM-A520F using Tapatalk
Not even UK trolling Booney?
Not even UK trolling Booney?
Page 764 of 1027
Posted: Thu May 21, 2020 6:21 pmNot even UK trolling Booney?
Re: I need to know....
Posted: Thu May 21, 2020 6:25 pmNot sure. Havent ventured into that part of forum.Corona Man wrote:mighty_tiger_79 wrote:Not much
Sent from my SM-A520F using Tapatalk
Not even UK trolling Booney?
Sent from my SM-A520F using Tapatalk
Re: I need to know....
Posted: Sun May 24, 2020 11:34 pmMagellan wrote:helicopterking wrote:Magellan wrote:helicopterking wrote:Neighbour wants to build a shed the length of my block and almost 4m high. Fence between us is 1.8m.
We live in a close proximity residential area with not a huge amount of yard/viewing space
Council have approved it, is there any point in arguing it?
What's your beef with the proposed structure - loss of sunlight, visual dominance of a 4m high boundary wall?
Also, did Council formally notify you of the application and seek your comment, and if so, what category of application (2 or 3) was it?
Yes the council have. The visual side of it.
Will Box in the entire side of the property. Zero southerly breeze will enter my yard. Guttering of the structure is 30-40cm higher then my roof guttering.
Category 2.
Cheers helicopterking. Being category 2, and since the council has already approved it, you don't have a right to appeal the decision which you would have if it was category 3.
If there were grounds to do so, you could appeal the description they gave the proposal, or the category (you would argue that it should've been category 3, which means they've deprived you of your right to appeal the final approval). If successful, the council would probably have to reassess the application again and notify it correctly, and at the end of the process, you could challenge the approval if granted.
It states the ‘demolition of exisiting shed and construction of free standing shed’.
The exisiting shed got demolished by him 5 weeks ago.
Does there have to be a certain distance between the fence and shed, as there is not one stated on the building plan?
Re: I need to know....
Posted: Mon May 25, 2020 8:01 amhelicopterking wrote:Does there have to be a certain distance between the fence and shed, as there is not one stated on the building plan?
The plan submitted by your neighbour should indicate the location of the shed with respect to the property boundaries. There are no hard and fast rules on setbacks from boundaries from the council's perspective (even if its Development Plan states an actual number). Building on boundaries can be acceptable, the question becomes what are the impacts of doing so. If they've already approved it, then they've made the decision (rightly or wrongly) that those impacts on balance are acceptable.
Which council are you in, by the way?
Re: I need to know....
Posted: Mon May 25, 2020 8:16 amAlways thought it was .900 back from the boundary so the eaves never encroached the neighboring property & preventing a ''Rat Trap'' between the shed & existing fence. Heater may know.
Re: I need to know....
Posted: Mon May 25, 2020 8:53 amIf it's less than 900 then no eavesSheik Yerbouti wrote:Always thought it was .900 back from the boundary so the eaves never encroached the neighboring property & preventing a ''Rat Trap'' between the shed & existing fence. Heater may know.
Re: I need to know....
Posted: Mon May 25, 2020 9:01 amits 600 unless the structure forms part of the boundary fence then it can be right on it. Gutter cannot overhang though.
Re: I need to know....
Posted: Tue May 26, 2020 8:42 pmI need to know how many games @amber_fluid has played and the breakdown between clubs please
Re: I need to know....
Posted: Fri May 29, 2020 5:11 pmi need to know if there is any pubs in the CBD open under the current 10 inside/10 outside rule today.
im fanging for a beer and dont want to wait at my desk till my missus finishes and picks me up...
im fanging for a beer and dont want to wait at my desk till my missus finishes and picks me up...
Re: I need to know....
Posted: Fri May 29, 2020 8:52 pmtipper wrote:i need to know if there is any pubs in the CBD open under the current 10 inside/10 outside rule today.
im fanging for a beer and dont want to wait at my desk till my missus finishes and picks me up...
There's heaps mate but you've got to eat a meal.
I'm venturing back to a pub tomorrow for lunch (Port Broughton Hotel) before doing a major pub crawl Tuesday onwards next week!
Re: I need to know....
Posted: Thu Jun 04, 2020 9:33 amHow's business for you folk out there?
Re: I need to know....
Posted: Thu Jun 04, 2020 9:43 amBooney wrote:How's business for you folk out there?
Busy AF.
Re: I need to know....
Posted: Thu Jun 04, 2020 10:26 amBusier than ever.Booney wrote:How's business for you folk out there?
Last few months has smashed all previous records out of the park.
This is usually the time of year we quieten off a little but currently busier than Christmas period
Re: I need to know....
Posted: Thu Jun 04, 2020 11:40 amBooney wrote:How's business for you folk out there?
We are going ok, not smashing it by any means. Last 3 months say 15% down on budget.
That’s a lot better than some of our customers that are as much as 80% down.
One of my bugger clients supplies to both the airline and car parking industries... suffice to say, they are hurting bad!
Re: I need to know....
Posted: Thu Jun 04, 2020 11:46 amCorona Man wrote:One of my bugger clients supplies to both the airline and car parking industries... suffice to say, they are hurting bad!
I guess there’s really no need to say where...
Re: I need to know....
Posted: Thu Jun 04, 2020 11:56 amSpargo wrote:Corona Man wrote:One of my bugger clients supplies to both the airline and car parking industries... suffice to say, they are hurting bad!
I guess there’s really no need to say where...
I didn't know CM could type with a New Zealand accent?
Re: I need to know....
Posted: Thu Jun 04, 2020 11:59 am
Re: I need to know....
Posted: Thu Jun 04, 2020 12:29 pm
Re: I need to know....
Posted: Thu Jun 04, 2020 8:43 pmLightning McQueen wrote:Booney wrote:How's business for you folk out there?
Busy AF.
X2, with the arrival of the next canoe.
Luckily being in the Defence industry we, and our suppliers, were fairly shielded from Covid.
I have negotiated with my boss to WFH every 2nd Friday to get a day without distractions.
Re: I need to know....
Posted: Fri Jun 05, 2020 6:02 amBooney wrote:How's business for you folk out there?
Booked up 3 months ahead with a few small gaps, so yeah extra well especially going into winter